When milling burs are involved, removing them can seem daunting at times. But by utilizing a few simple tricks, you can make this task much less of a burden. It’s the only way to get the perfect, seamless cut you desire. Here is some guidance to put you on the right track.

Utilize a quality bur extractor to extract your milling burs with ease. This specialized tool consists of a thin, elongated shaft with an attached small hook at the end. Simply insert the apparatus into the system’s flute, hook it onto the bur’s back, and rotate as you pull it out – easy as that.

If you don’t have a bur extractor handy, no need to fret – grab a drill bit of a size slightly smaller than the flute of the milling bur. Insert it into the flute and twist counterclockwise – and presto, the bur should be on its way out!

Insert an end mill into the flute of the milling bur and simply twist it anti-clockwise; the bur should quickly unscrew from the workpiece. An end mill is specially crafted to carry away material from the endpoint of a component, as well as to also extract milling burs.

If you need to remove milling burs, you can employ a chisel to do the job, albeit with extreme caution! Carefully insert the flat blade of the chisel into the grooves of the bur, then give it a gentle tap with a hammer. The bur should gradually come loose. Nonetheless, please be aware that this is not the most optimal tool for this situation.

A file can be used to extract milling burs, although it is not the recommended choice. If you opt for a file, be mindful of proper technique. Gently slip the file into the flute of the bur and then move it in a forward direction. You should notice the bur beginning to come out.

Extracting milling burs can be quite a challenge, but here’s hoping that these simple tips will make it somewhat more manageable.

Related Product